Recent Posts

Jun 28, 2010

An Open Letter to Bicycle Quarterly

What follows is a brief letter from Above Category's Elite Team Captain from last year, Ian Tuttle, giving his feedback to the "review" of Dario Pegoretti's Love #3 and his own experiences of that bike. I have my opinions as well, but learned that if you don't have something good to say...


June 20, 2010

Dear Bicycle Quarterly,

I was puzzled by Jan Heine’s review of the Pegoretti Love #3. Mr Heine clearly has many years of riding under his chamois, and I know it’s always a slippery proposition to dispute somebody’s opinion. But. There seem to be some flaws in his bike test.

First of all, Mr Heine makes a big to-do about the Pegoretti’s sketchy handling and tough road vibrations. I counted four different complaints about the Pegoretti’s “narrow tires.” So far as I know, there is no standard issue tire that comes with a Pegoretti frame. How can Mr Heine fault the Pegoretti’s handling when so many of his issues arose from the 21.5mm tubular tires he rode? There’s a reason why roubaix riders ride 25mm tires. Because they absorb vibration! Because they offer better contact on variable road surfaces! Why didn’t Mr. Heine try swapping wheels with his testing buddy, Mark Vande Kamp, and really get scientific about it?

Second, I caught quite a whiff of subjectivity in the so-called acceleration tests. Maybe Mr Heine could have made a quantified measurement of watts by borrowing a PowerTap or SRM instead of blaming the bike when he lost to Mr Vande Kamp in the sprint. “Watching powerlessly,” indeed. Mr Heine quips, “Trying to accelerate in order to drop the other rider on a hill had no effect.” I’ve experienced that too. It’s called being the weaker rider. It’s called fatigue. (There’s a proverb out there, about a poor carpenter, that comes to mind, too…).

Third, maybe I’m too new-school, and if so, forgive me. What is this about “getting a bike to plane?” I mean, I understand about boats breaking the surface tension of water, but a bicycle? Is there a magical speed at which the tires just take wing? If so, I’d like to know about it!

I’ve ridden a lot of bikes in my day. I’ve owned steel, carbon fiber, aluminum, and scandium road frames. I’ve put thousands and thousands of miles on each. The best bike I’ve ever had the pleasure to own is my Pegoretti Love #3. I’ve ridden casual century rides and countless easy miles of spinning. I’ve raced it all over the country in numerous NRC races at the highest level of the sport. I’ve raced hill climbs and stage races, criteriums and dirt road “roubaix” style courses, all on the Love #3. I’ve raced it in Pro/1 fields of 200+ riders, where tight handling is imperative. Average speeds for a hundred-mile stage can top 30mph, and in a descent the pack betters 60mph; surely these are good tests of sound handling at high speed. Maybe you can change the name of this “Bike Test” column to something like “Personal Frustrations.” I don’t know. Just a thought. I always understood tests to be based on objective standards.

I only took the time to write this letter because I am so awed by the performance of my Love #3, which always handles like a dream, accelerates intuitively, and cruises as fast or as slow as my legs can push it.

Sincerely,

Ian Tuttle




Ian Tuttle closing the gap on Levi and Co. at last years Sea Otter, on his Pegoretti Love #3...



Same model as that in the test. Do we have any opinions on which one looks like a more appropriate fit?



My personal Love #3, I agree w/ Ian on all accounts, one of the best bicycles I have ever owned.



Dean Bentley's Love #3.


Here is the Bicycle Quarterly website: http://www.vintagebicyclepress.com/currentissue.html

And here is a thread you can read on the matter if you are so inclined: http://www.velocipedesalon.com/forum/f2/bicycle-quarterly-reviews-love-3-a-15832.html

In parting, we don't care if anyone has issues, or dislikes about bikes we like, or sell, but if you are going to print these issues, do it right. This almost seems like a joke, as if he's about to say, "gosh guys, I was only kidding, jeez!" He still has time I guess...

AC out




Jun 25, 2010

Today's ride & our new BMC Team Machine

We really needed to get a report out due to our absence the last couple of weeks, sorry about that! Kris (our tech) is in Bend OR right now racing at the National Championships. A pretty damn good showing in the TT there w/ a 12th place finish as well. Only about 40 seconds off the podium. He did the Elkhorn Stage Race the weekend prior, a great, great race and something that should go on every roadies calendar at least once.
Here is a quick report on building my (and the shops) brand new BMC Team Machine. We've been selling them out for the past couple months, and finally got an extra one in that we could finally put through the paces and tell you about instead of relying on what others are saying, as good as that may be...



Drinking Leffe and building bikes, yep, nothing has changed. But don't freak out, I was building my own bike, so it would be my ass if I forgot to tighten something...



The interestingly shaped fork and seat post, two of the three parts that make up the Tuned Compliance Concept (TCC). TCC, fancy marketing department acronym speak, or real world benefit to the end user? Will find out soon enough. But everyone who has purchased one from us so far definitely has been the latter.
Here is how we built the bike:
  • 50cm frame set, 923g for the frame (with cage bolts, cable guide, derailleur hanger... 325g for the fork and 240g for the post. Interesting numbers but pretty useless as the end number is what we are really looking for and even then, it's the legs that matter, right? But still, light is nice...
  • Campagnolo Chorus, 170mm cranks in 53X39 paired w/ a 12X27 cassette for training. But since all I do right now is train, 12X27 year around I guess!
  • 3T Pro stem and Rotundo Pro bar. Super basic and reasonably inexpensive, plus as you will find out we needed all the help we could get to ADD weight!
  • Fizik Antares OO saddle. Currently my saddle of choice, feels nice but looks baddass...
  • Speedplay Ti Zero pedals
  • Arundel cages
  • Lightwieght Standard wheels. Yes, the nicest wheels I've EVER used. And I've tried them all. Will do a full write-up on those sometime soon...
  • Continental Competition tires, 110psi front and rear but want to try running a tad lower...


-17 degree, 14cm 3T ARX Pro stem (custom finished!) allows me to fit on the 50cm frame even though I'm over 5'10". Will settle w/ 2cm of spacers. If I wasn't going to use this as a demo bike for the shop I'd stick on the 84degree stem w/ zero spacers for a more pleasing aesthetic. Rotundo bars are simple, feel nice look classic and pro and work well for me personally.



The end result. First impression? SMOOTH. Smoothest bike I've ever been on, by far! Oh, and LIGHT, 14.26lbs fully loaded, with chorus! Yeah, and Lightweights, but you can get lighter (but no where near as nice) wheels for much, much less. So, if all I was worried about was a number, I could go so much lower. But I'm not. This is a ROAD racing bike, a century bike and long ride bike. It'll hold it's own in a crit, but if you are a dedicated crit racer, hop on the BMC Race Master. The BMC Engineers nailed it big time here and the Marketing guys came up w/ the acronym, TCC... We have a few of these in stock now, a 47cm in Red and then a 47cm, 50cm (this one), 53cm, 57cm and a 60cm all in White. Give us a call or stop by to check it out and learn more...

And then there is this:


Really?


Thanks for reading!





Jun 24, 2010

Building a Pegoretti Responsorium

About 2 weeks ago, we had the pleasure of building one of the coolest Pegoretti Responsoriums that we've had in yet. We did a few custom things here and there, but pretty much everything is stock, but it all went together so well, performance-wise and aesthetically.



First things first, prep the frame. This is for sure a dying art with the advent of BB30 and all the other "System Integration" stuff going on. For me at least, this gives the bike a little more soul...



And this is why you chase the threads...



The end result of chasing, super clean. Next step is facing the shell to ensure a perfectly parallel platform to install the cups...



The facing tool.



Then comes chasing and facing of the head tube, chasing the derailleur hanger and lastly, the water bottle mounts the cable guide mount and the shifter mounts.



Starting the build, thread chasing tool still in the shifter mount. Love this bike, the customer only had two requests, a white base coat and no red anywhere on the bike...



Something else you don't see much of anymore, the down tube shifter mounts.



Lightweight brake blocks. Work great with the wheels. We have found much better than the yellow ones made by the same company, Swiss Stop.



Custom finished Deda stem. We had it painted in a glossy black to match the Edge 1.0 fork that we clear coated.



Almost finished, some bar tape and dial in the position...



Fizik tape and the perfectly matched Chris King headset, Edge fork and Deda stem...



Nice wheels



One thing I'd do over is remove the Deda logos on the bar. Plus, the Presa decal is the only red on the entire bike, not cool!



Yep



All in, a very low 15lb steel bike. Little bit different from the 23lb Bob Jackson I rode 15 years ago.

Thanks for reading!

Jun 15, 2010

Yes, we are still alive, thank you

We've had time to build some killer stems though!

I guess you could just say that I've had a little writers block though! We are coming back with more updates soon, promise, kinda... Thanks for all the emails and calls. Have had a super busy last few weeks building some of the coolest bikes yet and of course riding some of the coolest bikes yet. Keep your eyes peeled in the next day or so and thanks for being so patient!

Cheers!

Jun 2, 2010

More frames from Dario Pegoretti in stock, but going quick!

Here is a quick inventory of which of Dario's frames we have in stock or access to now. Give us a call if any of them interest you but don't wait too long as they generally don't last. For good reason...


Don't get too excited, many of these are already sold! See below for current inventory


Responsorium


Ciavete
  • 53cm Ciavete
  • 57cm Ciavete

Catch the Spider

  • 50cm Catch the Spider
  • 53cm Catch the Spider
  • 54cm Catch the Spider
  • 55cm Catch the Spider
  • 56cm Catch the Spider

Goze

  • 53cm Goze
  • 55cm Goze
  • 56cm Goze



Love #3


Manovella

  • 48cm Manovella
  • 53cm Manovella
  • 54cm Manovella

8:30am


8:30am in sweet luscious Red

51cm Red

Midnight Blue (gorgeous!)
  • 59cm Midnight Blue

Marcelo


Baci
  • 50cm Baci
  • 58cm Baci

Duende

Osei

  • 57cm Osei

ABVD

  • 51cm ABVD
  • 55cm ABVD

Lori

  • 56cm Lori







Jun 1, 2010

What's new?



So, we've been going through a little bit of Twitter, Facebook and Blog burnout the last couple of weeks, sorry about that. But, it's all for a good reason. We are changing all the time and have a bunch of new services coming up that are very exciting to us and I know will be for all our customers as well. Some will be happening in the next month or so, and some a little more long term. We've also been growing and getting busier all the time, and while that is great we are doing out best to keep the feel of the shop true to our original intent. Most importantly, getting on the bikes as much as possible. This is important as we have a lot of new products here that we are testing internally, and can only do this by logging some good miles. As you can see from these photos, that can be pretty rough! Here are some things that you can look forward to this next week from us;

1. Moots RSL test is about complete, we've had close to a thousand miles on it in a few different configurations and we'll let you know what we feel and give an accurate description of the bike and who we think it'll work best for.
2. Easton EA90 carbon clincher wheels. Same as the RSL, we wanted to make sure to ride it in all conditions before we wrote about it and that has happened, look for that later this week as well.
3. We will post a list of Dario Pegoretti's bikes that we have for sale tomorrow as well, have sold a bunch but have more available.
4. Our Jr. Team is growing in it's professionalism all the time. We now have a dedicated DS in Josh Snead and were successful in the first race with Alex Howard taking the win in the State Championship Criterium. Great work to Alex and the entire Jr. Squad, will have a full feature soon as the National Championships get closer.
5. We have some great trips coming this summer. First is a trip to Treviso Italy for the Pinarello Marathon (used to be Grand Fondo Pinarello) to visit with our friends there and get a first look at the new 2011 line. Then It's off to Switzerland to visit Assos HQ and take delivery of a super sweet prototype that we'll tell you about later. After that it's off to BMC for some more early viewing and a trip to Paris for the last stage of the tour and a little party w/ a certain team. We'll keep you updated on that trip as it happens!
6. And a ton of other stuff, but that'll get us started for now and back on track. Thank you everyone for all the support and letting us know that there are some people out there keeping track of us!



Typical summer morning ride conditions...